Standaard versnipperaar met één as
A ram-fed single-shaft shredder designed for rigid plastics, pallets, wood waste, and industrial scrap with controlled output size for downstream recycling.
- Hydraulic pusher improves feeding on bulky and irregular materials.
- Single rotor and screen-controlled output support more uniform discharge size.
- Suitable for primary shredding or secondary size reduction before granulation.
Belangrijke onderdelen
Hydraulic Pusher
Feeds bulky materials into the rotor with more consistent pressure and less operator input.
Enkele rotor
Low-speed, high-torque cutting action helps reduce vibration and improve throughput on tough materials.
Rotor and Counter-Knives
Knife geometry is designed for stable cutting and easier routine maintenance.
Sizing Screen
Controls discharge size so output matches your next process stage more closely.
Hoe het werkt
1. Materiaaltoevoer
Material enters the hopper and is advanced by the hydraulic ram toward the rotor.
2. Rotor Cutting
Rotor knives cut against fixed counter-knives for stable size reduction of bulky materials.
3. Screen-Controlled Discharge
Material circulates in the chamber until it passes through the selected screen size.
Toepassingen
Stijve kunststoffen
Suitable for crates, pipes, purges, and bulky rigid plastic scrap.
Wood and Pallets
Handles pallet waste, timber offcuts, and other wood materials that require controlled size reduction.
Industrial Scrap
Used for production rejects, packaging waste, and dense industrial offcuts.
Secondary Shredding
Can work after a pre-shredder when a more uniform screened output is required.
Overzicht van de apparatuur
Standard Ram-Fed Configuration
RTMS series shredders follow the standard single-shaft layout with a rotor, counter-knives, hydraulic pusher, and sizing screen to produce a more controlled output.
- Hydraulic ram improves feeding on bulky materials
- Rotor and counter-knives support controlled cutting
- Screen selection defines final output size
Technische specificaties
| Parameter | Referentie | Notities |
|---|---|---|
| Machinetype | Ram-fed single-shaft shredder | Single rotor with hydraulic pusher and sizing screen. |
| Typische materialen | Rigid plastics, pallets, wood, industrial scrap | Can be tuned for different bulk densities and output sizes. |
| Output Control | Schermgedefinieerd | Screen size selected according to downstream process requirements. |
| Knife Maintenance | Inspection and rotation | Routine service includes knife inspection, counter-knife setting, and screen checks. |
| Gebruik positie | Primary or secondary shredding | Depends on feedstock size and the output target. |
Bekijk de papiervernietiger in actie.
Garantie & Installatie
1-jarige garantie
Includes standard equipment coverage with remote technical support and spare parts coordination.
Installatieondersteuning
We provide commissioning guidance, operator training, and startup support based on your project requirements.
Veel Gestelde Vragen
Wat is een standaard shredder met één as?
A standard single-shaft shredder is a ram-fed, single-rotor machine that cuts material against fixed counter-knives. A screen controls the output size for downstream recycling.
How do I choose the screen size?
Screen size depends on your downstream process. Smaller screens produce a more uniform output for granulation, while larger screens increase throughput for pre-shredding.
Kan een shredder met één as grote, harde kunststoffen en hout verwerken?
Yes. The hydraulic pusher presses bulky materials into the rotor, improving bite and throughput on rigid plastics, pallets, wood waste, and industrial scrap.
Wordt het gebruikt als primaire of secundaire shredder?
Both. Single-shaft shredders can work as a primary shredder for rigid plastics and wood, or as a secondary shredder after pre-shredding when more uniform output is needed.
Vraag een offerte aan
Share your material type, target output size, and throughput requirement. Our team will recommend the right shredder configuration and lead time.
We respecteren uw privacy. Uw informatie wordt alleen gebruikt om uw project te bespreken.
Reacties zijn gesloten.