高性能HDPEボトル洗浄リサイクルライン
使用済みの牛乳ボトル、洗剤容器、ドラム缶、硬質容器を、業界最高水準の純度と水分制御を誇る超高純度高密度ポリエチレン(HDPE)フレークへと再生します。
- 500–3,000 kg/h カスタマイズ可能な処理能力
- フレーク含水率 <1% 直接押出成形に対応
- 99.8%の汚染物質除去率 油分、ラベル、接着剤の除去
過酷な汚染に対応:牛乳残渣、油分、ひどい土汚れ
使用済みの硬質HDPEリサイクルには、一般的なフィルムリサイクルとは異なる特有のエンジニアリング課題が存在します。ベール化された牛乳ボトルには酸敗した乳脂肪・タンパク質と強烈な異臭が付着し、家庭用洗剤ボトルや産業用ジェリカンには粘着性のある界面活性剤、合成油、強固に密着したラベルが含まれています。
Rumtoo’s turnkey HDPE bottle washing plant integrates high-shear wet granulation, high-speed friction scrubbing, continuous 85°C caustic hot wash stripping, and precision hydrodynamic sink-float separation. The system consistently removes labels, hot-melt glues, and chemical residues—producing premium regrind flakes suitable for high-value blow molding and pipe extrusion.
HDPEボトル洗浄ラインの主な特長
過酷な連続稼働、高い回収率、および低運用コスト(OPEX)を実現するために構築された産業グレードの構造。
-
高効率ロータリー式ラベル剥離
特許取得済みの機械式ロータリー式ラベル剥離機が粉砕前にPVC/PETシュリンクスリーブや紙ラベルの98%以上を除去し、後段スクリーンの早期目詰まりを防ぎます。
-
高負荷湿式粉砕
サブゼロ深冷処理されたD2/SKD-11製シザーブレードを備えた注水式粉砕室が、刃物を冷却し予備洗浄を開始しながら、硬質容器を均一な10〜14 mmフレークに細断します。
-
高速フリクション洗浄(摩擦洗浄)
1,000〜1,200 RPMで回転するマルチパドル動的ローターが強力なフレーク同士の機械的摩擦を生み出し、頑固な残留物、糊、牛乳の被膜を剥がし取って外部スクリーンバスケットへ排出します。
-
連続高温アルカリ洗浄
自動薬剤投入を備えた蒸気または電気加熱式の85°Cアルカリ薬液浴が、有機油を徹底的にけん化し、乳タンパク質を溶解し、充満する異臭を中和します。
-
多段式流体比重分離
高精度な比重分離沈浮水槽が、浮上するポリオレフィン(HDPEフレークおよびPPキャップ、密度1.0 g/cm³)をきれいに分離します。
-
遠心脱水&風力選別
高G遠心脱水と熱風フラッシュ乾燥およびジグザグ風力選別を組み合わせることで、乾燥した(水分率≤1.0%)粉塵のないフレークが得られ、直接の押出や保管が可能です。
処理対象原料&用途分野
使用済み(ポストコンシューマー)および産業用(ポストインダストリアル)の多様な硬質ポリオレフィン原料に柔軟に対応。
-
牛乳&飲料ボトル
牛乳の凝固残渣、ジュースの滓、スナップオン式ネックリングが付着したナチュラルおよび白色ブロー成形HDPE容器。
-
洗剤&シャンプーボトル
高粘度の界面活性剤、化粧品オイル、強力な感圧ラベルなどで汚染された着色HDPE容器。
-
HDPEドラム缶&ジェリカン(携行缶)
Large blow-molded industrial containers, lubricant oil canisters, and chemical transport barrels requiring intensive pre-shredding.
-
PPボトルキャップ&クロージャー(栓)
Polypropylene threaded caps and dispensing closures co-processed and float-separated alongside rigid HDPE containers.
-
硬質クレート&パレット
Injection-molded HDPE/PP beverage crates, logistics totes, field harvest boxes, and structural pallet scraps.
-
自動車用油脂・ケミカル容器
強力な高温アルカリ洗浄を必要とするエンジンオイル容器、ウォッシャー液ボトル、ラジエーター冷却水容器。
HDPEボトル洗浄プロセス:ステップ別解説
ベール状の使用済みポストコンシューマーボトルから、直接押出可能な超高純度硬質フレークまで、完全自動化された連続マテリアルフローを実現。
-
Automated Bale Breaking & Trommel Pre-Wash
高耐久ベールブレーカーが強固に圧縮されたボトルのベールをほぐし、連続散水機能を備えたロータリートロンメルスクリーンが選別前に泥土、砂、飲料の飲み残しを洗い流します。
-
Mechanical Rotary De-Labeling
特許取得済みの湾曲合金製ローターペグが、ボトルネックを押し潰したり有価ポリマーを損なったりすることなく、98%以上の効率でスリーブや紙ラベルを優しく剥離します。
-
Manual / Optical Sorting Platform
Modular dual-sided conveyor platform allows manual rejection of foreign metals, PVC bottles, or off-color containers (optional NIR optical polymer sorting available).
-
高負荷湿式粉砕
Water-injected rotary granulator with D2/SKD-11 scissor-cut knives grinds bottles into uniform 10–14 mm flakes while cooling cutting edges and flushing abrasive grit.
-
High-Speed Centrifugal Friction Washer
Dynamic multi-paddle rotor spinning at 1,000–1,200 RPM creates high-shear flake friction, tearing off surface milk proteins, stubborn glues, and fine sediments.
-
Continuous Hot Caustic Washing Tank
80–85°C alkaline chemical bath (1–2% NaOH + eco-surfactants) with continuous paddle propulsion dissolves viscous motor oils, saponifies fats, and strips adhesive residues.
-
Multi-Stage Sink-Float Separation Tank
Precision hydrodynamic separation based on specific gravity: floating HDPE and PP flakes (<0.96 g/cm³) are propelled forward while sinking PET, PVC, glass, and sand sink to the bottom discharge screw.
-
Centrifugal Dewatering & Air Classification
High-G centrifugal spin reduces surface moisture to <1.5%, followed by a thermal flash pipe and zig-zag air classifier that lifts ultra-light dust/fines, yielding dry (≤1.0%), injection-ready HDPE flakes.
HDPEボトル洗浄ライン技術仕様
ターンキー産業用プラスチックリサイクル向けに設計された標準生産構成。ご要望に応じたカスタム処理能力も対応可能です。
| 仕様 / 型式 | HWL-500 | HWL-1000 | HWL-1500 | HWL-2000 | HWL-3000 |
|---|---|---|---|---|---|
| 投入処理能力(kg/h) | 500 kg/h | 1,000 kg/h | 1,500 kg/h | 2,000 kg/h | 3,000 kg/h |
| 適用原料 | 使用済み牛乳ボトル、洗剤容器、HDPEドラム缶、化学品容器、PPキャップ | 使用済み牛乳ボトル、洗剤容器、HDPEドラム缶、化学品容器、PPキャップ | 使用済み牛乳ボトル、洗剤容器、HDPEドラム缶、化学品容器、PPキャップ | 使用済み牛乳ボトル、洗剤容器、HDPEドラム缶、化学品容器、PPキャップ | 使用済み牛乳ボトル、洗剤容器、HDPEドラム缶、化学品容器、PPキャップ |
| ボトルラベル剥離機 | 15 kW(ローター径 Ø 600 mm) | 22 kW(ローター径 Ø 800 mm) | 30 kW(ローター径 Ø 900 mm) | 37 kW(ローター径 Ø 1000 mm) | 45 kW(ローター径 Ø 1200 mm) |
| 湿式粉砕機(ウェットグラニュレーター)ローター駆動部 | 37 kW(回転刃10枚 / 固定刃4枚) | 55 kW(回転刃10枚 / 固定刃4枚) | 75 kW(回転刃10枚 / 固定刃6枚) | 90 kW(回転刃12枚 / 固定刃6枚) | 132 kW(回転刃14枚 / 固定刃8枚) |
| 高速フリクションワッシャー回転速度 | 1,000 RPM(15 kW) | 1,100 RPM(22 kW) | 1,200 RPM(30 kW) | 1,200 RPM(37 kW) | 1,200 RPM(45 kW) |
| 連続高温洗浄システム | 1槽(3 m³、85°C、11 kW) | 1槽(5 m³、85°C、15 kW) | 2槽(10 m³、85°C、22 kW) | 2槽(12 m³、85°C、30 kW) | 2槽(16 m³、85°C、45 kW) |
| 流体工学的比重分離沈浮水槽段数 | 1段(6 m、パドル4枚) | 2ステージ(6 m × 2、パドル8基) | 2ステージ(8 m × 2、パドル10基) | 2ステージ(10 m × 2、パドル12基) | 3ステージ(10 m × 3、パドル16基) |
| 遠心脱水&最終含水率 | 1,200 RPM(水分率 ≤1.5%) | 1,200 RPM(水分率 ≤1.0%) | 1,400 RPM(水分率 ≤1.0%) | 1,400 RPM(水分率 ≤1.0%) | 1,500 RPM(水分率 ≤0.8%) |
| 金属材質仕様&耐摩耗保護 | D2 / SKD-11刃物 + SUS304接水部 | D2 / SKD-11刃物 + SUS304接水部 | D2 / SKD-11刃物 + SUS304接水部 | D2 / SKD-11刃物 + SUS304接水部 | D2 / SKD-11刃物 + SUS304接水部 |
| 設備電力容量&設置面積 | ~120 kW(32 × 5 × 4.5 m) | ~195 kW(42 × 6 × 5.0 m) | ~280 kW(52 × 7 × 5.5 m) | ~360 kW(60 × 8 × 5.5 m) | ~490 kW(72 × 9 × 6.0 m) |
注:仕様は目安であり、原料の汚染率、目標とするペレット純度、設置工場の寸法に合わせてカスタマイズ可能です。
システム比較:Rumtoo 専用HDPEボトル洗浄ライン vs 一般的な汎用洗浄ライン
当社の自動ラベル剥離、連続高温アルカリ洗浄、多段比重分離が一般的なプラスチックリサイクル設備を凌駕する理由。
| 性能指標・評価項目 | Rumtoo 高耐久HDPEボトル洗浄ライン | 一般的な汎用洗浄ライン |
|---|---|---|
| ラベル&スリーブ剥離 | 98%+ Pre-Grind De-Labeling: Patented rotary de-labeler strips >98% PVC/PET shrink sleeves whole before granulating; protects wash screens from blinding. | <70% Post-Grind Separation: Lack dedicated pre-shred de-labelers; shredded sleeve confetti enters wash water, blinding dewatering screens and lowering flake purity. |
| 高温洗浄による油分・接着剤の除去 | Continuous 85°C Caustic Bath: Continuous 85°C caustic hot washer with automated chemical dosing saponifies dairy curds, vegetable oils, and hot-melt glues completely. | Ambient Cold Wash Only: Rely on cold ambient washing only; grease, milk residues, and adhesive glues remain on flakes, producing severe odor and pellet defects. |
| 比重分離精度 | Multi-Stage Hydrodynamic Float Tanks: Multi-stage counter-current sink-float tanks with deep vessels ensure complete floatation of HDPE/PP while sinking PVC/PET >1.0 g/cm³ to <50 ppm. | Single Shallow Tank: Single shallow static tank; turbulent surface flow carries heavy sinking PET/PVC fines across discharge weirs, contaminating HDPE regrind. |
| 残留水分率&乾燥 | ≤1.0% Moisture Flakes: High-G centrifugal spin + thermal air flash drying + zig-zag deduster achieves dry (≤1.0%), dust-free flakes ready for direct extrusion without pre-drying. | 3–6% Residual Moisture: Basic spin dryer leaving 3–6% moisture; flakes require expensive secondary offline drying or cause severe venting bubble holes during pelletizing. |
| 耐摩耗性&金属材質仕様 | D2/SKD-11 Knives & SUS304 Wet Contact: All wet contact surfaces fabricated in heavy SUS304 stainless steel; cutting chambers lined with replaceable Hardox wear plates and cryo-treated D2 blades. | Carbon Steel Contact: Standard carbon steel contact parts prone to severe caustic oxidation and rapid abrasive wear from sand/dirt, causing high maintenance downtime. |
| 水処理&水循環システム | Closed-Loop Recirculation: Integrated closed-loop water treatment system with wedge-wire screen filtration and flocculation sedimentation reduces freshwater consumption by up to 60%. | Open Single-Pass Discharge: Open single-pass water discharge consuming massive freshwater volumes and incurring heavy environmental compliance penalties. |
HDPEボトル洗浄ライン稼働動画
実際の産業現場で稼働する当社の高速洗浄・分離・脱水ラインの稼働状況をご覧ください。
よくあるご質問 (FAQ)
HDPE洗浄ライン設備投資における重要な運用上およびエンジニアリング上の検討事項。
当社の専用ロータリー式ラベル剥離機は、粉砕機に投入される前のベール状態またはバラ状態のボトル全体を処理します。ボトルの形状に適応する回転ブレードにより、ボトルを破砕したり穴を開けたりすることなく、PVC/PETシュリンクスリーブや紙ラベルの98%以上を剥がし取ります。粉砕前にラベルを除去することで、ラベル破片によるフレーク洗浄水の汚染や後段の脱水スクリーンの詰まりを防止します。
Post-consumer HDPE bottles typically contain milk protein residues, motor oil, household chemicals, and stubborn adhesive glue. Ambient cold washing cannot dissolve oily films or glue residues, resulting in severe odor, discoloration, and structural degradation in recycled pellets. Rumtoo's continuous hot wash system maintains an 80–85°C alkaline bath (with mild NaOH and surfactant dosing) to saponify oils, dissolve adhesives, and neutralize odors completely.
HDPE(密度 約0.94〜0.96 g/cm³)とPPキャップ(密度 約0.90〜0.91 g/cm³)は共に真水(密度 1.0 g/cm³)に浮上し、PETやPVCなどの異物は沈降します。HDPEとPPはどちらもポリオレフィンであるため、パイプ、シート、再生木材などの成形メーカーの多くは少量のPP混入を許容できます。ボトルtoボトルや高精度のブロー成形用途では、ボトル全体を処理する上流側の光学式色/ポリマー選別機、または洗浄後に純粋なHDPEフレークを単離する二次光学フレーク選別機を組み込みます。
Our wet granulator uses genuine D2 / SKD-11 high-carbon, high-chromium tool steel rotor and stator knives vacuum heat-treated to HRC 58–60. Because water continuously lubricates and cools the cutting zone during operation, blade life is extended by 2–3x compared to dry granulators. Under typical post-consumer bottle processing conditions, rotor knives run 400–600 hours between sharpenings, and each knife set can be reground 4–6 times before replacement.
The line achieves a final residual moisture level of ≤1.0% (and down to ≤0.8% with thermal air boost). This is achieved through a multi-stage mechanical drying sequence: first, a high-G horizontal centrifugal dryer strips free surface water to <1.5%, followed by an insulated hot air flash drying duct and zig-zag cyclone separator. Flakes can be directly fed into single-screw or twin-screw extruders without additional offline drying.
Operating a 1,000 kg/h HDPE washing line in an open loop would consume approximately 3–5 tons of water per hour. To minimize utility bills and environmental footprint, Rumtoo provides an integrated closed-loop water treatment system (including curved wedge-wire static screens, sedimentation tanks, and optional filter press). With recirculating loops, freshwater makeup is reduced to approximately 0.5–1.0 ton per ton of processed plastic.
Yes. Rumtoo HDPE bottle washing lines are engineered as modular polyolefin recycling plants. With minor adjustments to granulator screen hole diameters (typically 12–16 mm for thick-wall parts) and paddle speeds, the line efficiently washes PP beverage crates, injection-molded buckets, cosmetic bottles, and thermoformed PP containers.
標準的な処理能力1,000 kg/hのHWL-1000ラインは、長さ約42 m、幅6 m、最低天井高5.0 mを必要とします。総設備容量は約195 kWです(実際の稼働電力消費量は接続負荷の約65〜75%)。ユーティリティとしては、三相産業用電源(380V/415V/480V 50/60Hz)、最低3 bar圧力の産業用水道水、および高温洗浄槽用の蒸気接続(または電気熱交換器)のオプションが必要です。
保証&据付サポート
-
製品保証範囲
すべての構造フレーム、減速機、モーター、電気部品の製造上の欠陥に対して、標準で12ヶ月間の包括的保証を提供します。
-
設置と試運転
現場での機械組立、電気配線、PLCキャリブレーション、オペレーター安全教育、および世界中への生涯スペアパーツ供給サポート。
技術レイアウト&お見積もりを依頼
プラントのCADレイアウト設計、マテリアルバランス計算、個別お見積もりについては、当社のプラスチックリサイクル専門エンジニアにお問い合わせください。



