湿式プラスチッククラッシャー 高度なリサイクル
The wet plastic crusher combines crushing and pre-washing in a single stage, helping recyclers reduce contamination, cool the cutting chamber, and improve final flake consistency.
It is especially effective for dirty rigid plastics, films, bottles, and mixed scrap that would otherwise generate excessive friction and heat in a dry crusher.
- Built-in water spray helps clean material during crushing.
- Blade cooling reduces heat build-up and plastic smearing.
- Suitable for PP, PE, HDPE, ABS, and other dirty thermoplastics.
主な利点
Use wet crushing to reduce contamination early, protect blades, and support more stable washing-line performance.
Integrated Pre-Washing
Water rinses material during crushing, helping remove loose dirt and residues before downstream washing.
Lower Friction Heat
Blade cooling reduces the risk of melted plastic build-up and improves crushing consistency.
Improved Blade Life
Cooling and lubrication help reduce wear and extend maintenance intervals.
More Versatile Input
Handles bottles, films, rigid plastics, and mixed dirty scrap more effectively than many dry-only units.
技術仕様
| パラメータ | 詳細 |
|---|---|
| 関数 | Crushing and pre-washing in one stage |
| 適用可能な材料 | PP, PE, HDPE, ABS, bottles, films, and mixed dirty plastics |
| 冷却方法 | Water spray during crushing |
| Output Form | Uniform crushed flakes for washing or further processing |
保証と設置
1年間の保証
Core component coverage with spare-parts coordination and technical response support.
Commissioning Support
Setup guidance is available to optimize feeding, water use, and blade performance during startup.
ライン統合
We can help match the crusher with friction washers, float-sink tanks, and dewatering stages.
よくある質問
乾式粉砕機に対する湿式粉砕機の主な利点は何ですか?
The main advantage is built-in pre-washing and cooling. Water helps clean contaminants while cooling the blades, reducing friction, preventing plastic from melting, and extending blade life.
この機械は完全なプラスチック洗浄ラインを置き換えますか？
Not entirely. It provides excellent pre-washing, but for heavily contaminated plastics it usually works best as the first step within a complete washing line.
水は機械のメンテナンスにどのように影響しますか？
Water cools and lubricates the blades, reduces the frequency of sharpening, and helps prevent dirt and melted plastic from building up inside the cutting chamber.
湿式クラッシャーはすべてのプラスチックに適していますか？
It is highly effective for most thermoplastics such as PP, PE, HDPE, and ABS, especially for dirty materials or plastics that are prone to melting from friction.
今すぐ問い合わせる
Share your material type, contamination level, and capacity target. We will recommend a suitable wet crushing setup and quotation.
コメントは締め切りました。