Complete Soluții de reciclare
Tehnologia noastră de ultimă oră permite prelucrarea eficientă a diferitelor tipuri de materiale plastice, asigurând o recuperare maximă și deșeuri minime. De la tocatoare la granulatoare, oferim o gamă completă de mașini care se ocupă de orice, de la colectare și sortare până la reprocesare și peletizare.
- Integrated systems covering washing, sorting, size reduction, drying, and pelletizing.
- Configurable layouts for PET, PP/PE film, rigid plastics, tires, and mixed waste streams.
- Engineering support for new plants, upgrades, and custom factory layouts.
Key Features & Benefits
These systems are not just a collection of machines. They are built as coordinated production assets that reduce project risk, shorten ramp-up time, and improve long-term operating efficiency.
Single-Vendor Accountability
One contract, one engineering team, one point of contact from raw waste intake to finished pellet output, eliminating integration risk between separate suppliers.
Modular & Scalable Layout
Start with the stages you need today and expand later with hot wash modules, optical sorters, or extra extruders without reworking your plant foundation.
Pre-Engineered Plant Layouts
Every solution comes with a ready-to-build 3D plant layout, utility plan, and civil-works guide to reduce design time and construction errors.
Rapid Commissioning
Pre-tested sub-assemblies and standardized interfaces let our engineers commission a full line in 7–15 days, getting you to production faster.
Integrated Water & Energy Recovery
Closed-loop water treatment and heat-recovery systems are built into the line design, cutting utility costs by up to 40% compared with standalone machines.
Lifetime Optimization Support
We provide ongoing process optimization, remote monitoring, spare-parts programs, and periodic on-site audits to maximize uptime and output quality.
Sistemele noastre de reciclare
Each system below represents a complete production path with its own feedstock logic, cleaning sequence, and downstream output target. Use these as starting points for your plant configuration.
Bottle-to-FlakeSistem de reciclare a sticlelor PET
Automated washing and pelletizing line for PET bottles, focused on label removal, cap separation, hot wash, drying, and stable flake recovery.
Înainte de a investi, evalueazăPP / PE Reciclarea liniei de spălare
Complete washing solutions for contaminated PP/PE films, woven materials, and crushed plastics, with densifying and drying stages as needed.
Materiale plastice rigideLinie de spălare din plastic rigid
Specialized cleaning system for HDPE bottles, PVC pipes, drums, crates, and other rigid plastics that require heavy-duty size reduction and robust washing.
Compliance-FocusedReciclarea plasticului periculos
Safe and compliant processing solutions for hazardous plastic waste containers and materials, with dedicated washing logic and controlled residue handling.
Rubber RecoveryMasina de reciclare a anvelopelor
Turn waste tires into valuable rubber crumb and powder with shredding, steel separation, fiber removal, and size-controlled output preparation.
Materiale pe care le reciclăm
Our complete recycling solutions are configured around the material stream, contamination profile, and final product target, so each line starts with the right process logic.
Sticle PET
For post-consumer PET bottles with labels, caps, and organics, using de-labeling, float-sink separation, hot wash, and drying.
Filme PP/PE
For agricultural film, post-consumer packaging film, woven bags, and raffia, with shredding, friction washing, squeezing, and densifying.
Materiale plastice rigide
For crates, drums, pallets, pipes, and injection scrap, using heavy-duty shredding, wet crushing, washing, and regrind purification.
Tires & Rubber
For whole tires and rubber waste, with shredding, steel separation, fiber removal, and crumb sizing for downstream reuse.
Deșeuri periculoase
For contaminated industrial containers and hazardous plastic packaging, with dedicated washing, residue handling, and safe process isolation.
Materiale plastice mixte
For mixed municipal or commercial plastic streams that require front-end sorting, separation, and material-specific downstream lines.
întrebări frecvente
What is included in a complete turnkey recycling solution?
A turnkey solution covers the entire production chain under one contract: material sorting, size reduction (shredding/crushing), multi-stage washing, dewatering, drying, and pelletizing. We also include plant layout engineering, electrical design, water treatment, installation supervision, commissioning, and operator training — so you go from raw waste to finished pellets with a single vendor.
How long does it take from project start to production?
A typical timeline is 4–6 months: 2–4 weeks for engineering and layout finalization, 45–90 days for manufacturing, and 7–15 days for on-site installation and commissioning. We provide a detailed Gantt chart with your proposal so milestones are clear from day one.
Can I start small and scale up later?
Yes. Our modular design means you can begin with a core washing or pelletizing line and add stages — such as hot wash modules, optical sorting, or additional extruders — as your throughput grows. The initial plant layout accounts for future expansion so no major civil work is needed later.
What ROI can I expect from a complete recycling plant?
ROI depends on local feedstock cost, pellet market price, and line capacity. Many of our clients recover their investment within 12–24 months. We provide a detailed cost-benefit analysis during the proposal stage, covering raw material sourcing, utility costs, labor, and projected pellet revenue.
Ești gata să-ți optimizezi procesul de reciclare?
Whether you are starting a new plant or upgrading existing equipment, our experts are here to help you find the best solution for your needs.
Contact Us for a Quote