장비개요
산업 솔루션 개요
This separation system is designed to improve sorting accuracy, reduce contamination, and support cleaner downstream recycling output. A sink-float separation tank is also known as a float-sink tank, float washing tank, or floating washer.
주요 특징
분리 효율 향상
오염물질이나 혼합물질을 분리하여 더욱 깨끗한 제품 흐름을 지원합니다.
조절 가능한 작동
작동 매개변수는 재료 구성 및 식물 요구 사항에 따라 조정할 수 있습니다.
내구성이 뛰어난 산업용 구조
재활용 및 물질 회수 환경에서 지속적인 작동을 위해 설계되었습니다.
시스템 통합
더 큰 규모의 분류, 세척 또는 회수 라인의 일부로 설치할 수 있습니다.
일반적인 응용 분야
플라스틱 재활용
라벨, 미세 입자, 금속 또는 혼합 물질 분획을 분리합니다.
재료 회수 라인
최종 제품 보관 전 핵심 공정 단계로 사용됩니다.
오염물질 감소
세척, 펠릿화 또는 포장 전에 순도를 향상시킵니다.
맞춤형 분류 프로젝트
현지 자재 조건 및 공정 목표에 맞춰 구성됩니다.
Build a Complete Washing Line Around This Tank
A sink-float separation tank is one stage of a full plastic recycling wash line, not a standalone machine. Upstream, the material is shredded and friction-washed; downstream, the separated fractions are dried and pelletized. Most buyers specify this tank as part of a complete rigid plastic washing line, and size it using our sink-float tank sizing guide. The equipment below is what typically sits before and after the tank.
마찰 스크류 와셔
Sits before the tank. Scrubs off oil, glue, and surface dirt so the sink-float stage sorts clean flake.
Continuous Hot Washer
For oily or heavily contaminated regrind, a hot wash stage removes residues cold washing leaves behind.
원심 건조기
Sits after the tank. Spins off the free surface water from the separated flake before any thermal drying.
열 건조기
Brings flake below 1% moisture when the next step is pelletizing, where wet feed degrades the melt.
고정형 PP/HDPE 플라스틱 플리커 펠릿화기
Turns the clean, dried flake into uniform pellets — the right pelletizer for rigid HDPE and PP regrind.
단일 축 펠릿화 라인
A water-ring or strand single-screw line pelletizes washed flake at production throughputs.
기술 사양
| 특징 | 규격 범위 |
|---|---|
| 내부 너비 | 1000mm ~ 2000mm |
| 총 길이 | 4~7미터 |
| 내부소재 | 유형 304 스테인레스 스틸 |
| 외부 프레임 | 탄소강 |
| 컨베이어 패들 모터 | 애플리케이션별로 맞춤 설정 가능 |
| 인증 | CE 인증 가능 |
보증 및 설치
보증 범위
지원되는 기계 부품 및 제조 결함에 대해 표준 보증이 제공됩니다.
설치 및 지원
당사는 프로젝트 범위에 따라 설치 안내, 시운전 지원, 운영자 교육 및 예비 부품 서비스를 제공합니다.
Sink-Float Separation Tank Working Video
Watch how the sink-float separation tank moves plastic flakes through the water bath and separates materials by density during continuous operation.
자주 묻는 질문
플라스틱 재활용용 침강-부유 분리 탱크는 재활용 프로젝트의 재료 유형, 오염 상태 및 생산 목표에 따라 구성할 수 있습니다.
예. 레이아웃, 모터 크기, 소모성 부품 및 보조 구성 요소는 적용 요구 사항에 따라 조정할 수 있습니다.
네. 저희는 프로젝트 범위에 따라 설치 안내, 시운전 지원, 운영자 교육 및 사후 서비스를 제공합니다.
선택은 재료 특성, 목표 용량, 설치 조건 및 후속 공정에 따라 달라집니다. 귀사의 요구 사항을 검토한 후 적합한 구성을 추천해 드릴 수 있습니다.
맞춤형 솔루션을 요청하세요
자재 정보, 목표 용량 및 프로젝트 요구 사항을 알려주시면 적합한 구성을 추천해 드리겠습니다.




댓글이 닫혀있습니다.