Sink-Float Tank Sistemi PET Geri Dönüşümü
The sink-float separation tank is a core purification stage in PET bottle recycling, designed to remove floating PP and PE contaminants from heavier PET flakes through density-based separation in water.
It improves final flake purity, stabilizes downstream hot washing and drying, and supports higher-value rPET output.
- Separates PET from PP, PE, and label residues by density.
- Provides extra soaking and washing time during purification.
- Available in custom lengths and widths for different throughput targets.
PET Parçacığı Temizleme İçin Çalışma Princibi
Water acts as the separation medium: heavier PET sinks while lighter caps and label fragments float to the surface for removal.
PET Parçacıkları Batar
Because PET is denser than water, the valuable flakes settle to the bottom and are collected by the discharge conveyor.
Kirletici Elementler Yüzer
PP and PE bottle caps, label pieces, and other light contaminants remain on the surface for removal.
Temel Avantajlar
A critical separation stage for improving rPET flake quality before drying, storage, or pelletizing.
Yüksek PET Purity
Removes a significant amount of PP and PE contamination from bottle caps and label fractions.
İki Fonksiyonlu Süreç
The system separates by density while also providing an additional wet cleaning stage.
Optimize Edilmiş Soaking Süresi
Tank lengths from 4 to 6 meters allow more complete settling and more stable separation.
Dayanıklı Yapı
Type 304 stainless steel is used on key internal sections for corrosion resistance and long service life.
PET Geri Dönüşüm İçin Teknik Özellikler
| Şartname | Detaylar |
|---|---|
| İç Genişlik | 1500 mm to 2000 mm |
| Toplam Uzunluk | 4 to 6 meters |
| İç Malzeme | Type 304 stainless steel |
| Dış Çerçeve | Karbon çeliği |
| Vidalı Konveyör Motorları | 5.5 kW + 3.7 kW |
| Döner Tambur Motorları | 0.37 kW + 2.2 kW |
Garanti ve Kurulum
1-Yıllık Garanti
Includes core equipment coverage with spare-parts support and technical follow-up.
Kurulum Desteği
Engineers can assist with site layout, setup, and commissioning to optimize separation performance.
Sıkça Sorulan Sorular
Bu tankın PET parçacıklarından kaldırdığı ana kirletici nedir?
The primary contaminants are plastic bottle caps and label fragments made from PP or PE. These float while the heavier PET flakes sink.
Neden daha uzun bir tank daha iyidir?
A longer tank provides a longer residence time in water, allowing PET flakes to settle more completely and improving separation efficiency.
Bu tank, tesisime özel olarak uyarlanabilir mi?
Yes. Tank dimensions and motor configurations can be adjusted to match throughput requirements and facility layout.
Şimdi Sorgula
Send your throughput target and facility requirements to receive pricing, lead time, and a recommended tank configuration.
