Heavy Duty Shear Type Shredder for إدارة النفايات الصناعية
اكتشف ماكينات التقطيع ذات العمود المزدوج من سلسلة RTM الممتازة لدينا، المصممة لمعالجة النفايات الصناعية عالية الأداء. تتميز بتكنولوجيا متقدمة للقص، وأنظمة التحكم المنطقي القابل للبرمجة القابلة للبرمجة من Siemens، وتكوينات قابلة للتخصيص من أجل تقليل المواد على النحو الأمثل في مجاري النفايات البلاستيكية والمعدنية والمطاطية والعضوية.
Model Specifications
| نموذج | قطر العمود (مم) | كمية السكين (قطع) | القدرة (كجم/ساعة) | قوة المحرك (كيلوواط) | الأبعاد (الطول×العرض×الارتفاع مم) |
|---|---|---|---|---|---|
| رتم-0600 | 320×45 | 12 | 800 | 18.5×2 | 2960×880×2300 |
| رتم-0800 | 320×45 | 16 | 1000 | 22×2 | 3160×920×2400 |
| رتم-10000 | 400×50 | 20 | 2000 | 45×2 | 3360×980×2500 |
| رتم-12000 | 400×50 | 24 | 3000 | 55×2 | 3760×980×2550 |
| رتم-16000 | 500×65 | 24 | 5000 | 75×2 | 4160×1080×2600 |
| رتم-20000 | 600×77 | 28 | 8000 | 90×2 | 4600×1220×2800 |
Feedstock Examples
تتفوق آلات تمزيق الورق الصناعية لدينا في معالجة مجاري النفايات المتنوعة بما في ذلك الحاويات البلاستيكية والبراميل المعدنية والإطارات المطاطية ومخلفات البناء لإعادة التدوير وإدارة النفايات بكفاءة.
معرض المعدات
Powertrain Design
Precision Speed Reduction System
Advanced belt pulley transmission system ensures smooth torque delivery and optimal speed reduction. This drive design reduces mechanical shock loads on motors and reducers compared to direct-drive layouts.
Coupling Technology
Coupling configuration is selected to manage torque peaks during high-load events and support stable operation across variable feedstock density.
Knife Configuration
Modular Knife Stack
Modular knife design supports changes in thickness and geometry to target plastics, metals, rubber, and mixed streams. Configuration selection balances throughput, wear rate, and target output size.
Controls & Protections
PLC Integration
PLC control supports automated operation, alarm handling, and event logging. Protection logic can include overload response, interlocks, and controlled stops based on configured safety requirements.
التوافق المادي
البلاستيك
Large containers, barrels, and rigid packaging. Knife setup is selected to manage part thickness and contamination levels.
المعادن
Drums, cans, and light scrap where a shear-type action is required. Configuration is matched to density and target reduction.
Rubber
Tires and rubber parts. Setup focuses on torque handling and stable feed through variable elastomer hardness.
Appliances and E-Waste
Appliances and mixed assemblies where size reduction is required before sorting. Safety and overload protections are typically emphasized.
Organics
Biomass and organic waste for pre-processing. Knife and clearance selection depends on moisture content and stringy contamination.
Service & Maintenance
Maintenance intervals depend on duty cycle and feedstock abrasiveness. Typical preventive work includes:
- Knife inspection, rotation, and replacement planning
- Bearing and seal lubrication per service chart
- Reducer, coupling, and drive checks (alignment and wear)
- Fastener and structure inspection after overload events
- PLC alarm history review and sensor verification
For continuous operation, planned service is commonly scheduled every 6–12 months; higher contamination feedstocks may require shorter intervals to control wear and torque spikes.
الأسئلة الشائعة
Variable-speed torque control plus the anti-wrap rotor and PLC feeds hold the rated kg/h even when inbound material density shifts.
Modular knife sets, screens, and feed gate clearances allow planned swaps; PLC recipes store parameters for each commodity so changeovers stay predictable.
The Siemens PLC publishes alarms, torque load, and runtime data over Ethernet, enabling your control room or Rumtoo engineers to monitor performance and flag maintenance.
الضمان والدعم
ضمان محدود لمدة 1 سنة
Coverage includes frame, shafts, gearbox, and PLC logic for 12 months or 1,000 hours. Consumable wear parts are monitored through predictive alerts.
Installation & Remote Support
Rumtoo engineers commission equipment on-site, verify performance, and provide 24/7 hotline support plus diagnostics via the PLC interface.