Industrial Shredding Power on Your Desktop
The RTM Mini Compact Shredder fits a 650 × 300 mm footprint, plugs into a standard 220V outlet, and tears through plastics, rubber, and light scrap with the same dual-shaft cutting system used in full-size industrial shredders.
- H13 steel blades strong enough to shred reinforcing steel bars.
- Only 101 kg — position it anywhere without structural modifications.
- 1.5 kW motor with reducer — low energy cost, high torque output.
Quick Buyer Fit Check — Is This Compact Shredder a Smart Match?
This machine is built for a specific type of buyer. Check below before requesting a quote — it saves everyone’s time.
✓ Best fit if you:
- Need to process 5–20 kg/day of plastic, rubber, or light scrap
- Have an equipment budget starting around $4,000+
- Want industrial-grade cutting force in a compact footprint
- Run a lab, workshop, injection molding line, or pilot recycling operation
- Need a machine that runs on standard 220V, 120V, or other customized voltage
✗ Not the right fit if you:
- Are looking for a hobby or DIY unit under $1,000 — try entry-level filament shredders instead
- Need continuous 24/7 industrial throughput above 100 kg/h — see our Industrial Shredders
- Only shred paper or office documents — this is an industrial machine, and likely overkill for that use
Still a fit? Scroll down for specs, or jump to the contact form below.
The Problem with Small-Batch Shredding
Industrial shredders are too large, too expensive, and too complex for labs, workshops, and pilot production lines. Sending scrap to an external processor costs time and money — and you lose control over your material.
Office-grade shredders cannot handle plastics, rubber, or mixed scrap. You end up with a gap: you need industrial cutting power, but in a machine that fits on a workbench and runs on a standard outlet.
That is exactly why we built the RTMS-C120 series.
Equipment Overview
Industrial Performance in a Desktop Design
Equipped with a 1.5 kW gearbox motor and a 120 × 200 mm discharge port, this machine provides stable torque and efficient material throughput on a standard outlet. The simple control panel (Start, Stop, Forward/Reverse) makes operation straightforward for any laboratory or workshop environment.
Precision Built Dual-Shaft Cutting System
Two sets of moving blades and two sets of fixed blades work together for consistent tearing and shredding. The blade assemblies are made of H13 high-speed industrial steel — the same grade used in heavy-duty tooling — capable of processing tough plastics and even reinforcing steel bars.
Why Choose the RTM Compact Shredder?
Desktop Footprint, Industrial Cutting Force
At just 650 × 300 × 780 mm, it fits on a workbench or in a corner of your lab. Yet the dual-shaft system with 22 moving blades and 22 fixed blades delivers the same tearing action as larger machines.
H13 Steel Blades — Built to Last
H13 high-speed industrial steel provides exceptional wear resistance and edge retention. These blades can shred reinforcing steel bars, so plastics and rubber are handled with ease.
Plug-and-Play Installation
Standard 220V power supply with custom voltage options available, including 120V and other regional power standards. No compressed air, no foundation bolts. Place it where you need it, plug in, and start shredding.
Handles More Than You Expect
Plastics, rubber, cardboard, light mixed scrap, sample materials, and production rejects. The multi-material versatility means one machine covers most small-batch size reduction needs.
How the RTMS-C120 Compares
For buyers comparing tabletop hobby units, the RTMS-C120, and full industrial shredders, the differences come down to footprint, cutting system, throughput, and real-world material range.
See the Compact Shredder in Action
Watch the RTMS-C120 processing plastic material in real time. No editing, no speed-up — what you see is what this machine actually delivers on a standard 220V outlet, with 120V and other customized power supply options available for different markets.
Technical Specifications
| Parameter | Specification |
|---|---|
| Discharge Port Size | 120 × 200 mm |
| Blade Configuration | 22 moving blades + 22 fixed blades (2 sets each) |
| Blade Material | H13 High-Speed Industrial Steel |
| Motor Power | 1.5 kW with reducer |
| Power Supply | 220V standard (120V and other custom voltage available) |
| Control Panel | Start / Stop / Forward-Reverse rotation |
| Machine Weight | 101 kg |
| Overall Dimensions | 650 × 300 × 780 mm |
Need different blade widths or custom configurations? Contact us — we offer tailored options for specific material and output requirements.
Who Uses This Machine?
Injection Molding Workshops
Shred runners, rejected parts, and sprues on-site instead of accumulating waste or outsourcing disposal.
R&D Labs & Universities
Prepare material samples for testing, analysis, or pilot-scale recycling experiments with controlled output sizes.
Small Recycling Operations
Process mixed light scrap — plastics, rubber, cardboard — into volume-reduced output for downstream handling.
Quality Control Departments
Destroy defective products, confidential samples, or production rejects quickly and securely on-site.
Where the RTMS-C120 Is Working Today
Recent deployments include:
- 🇩🇪 Germany — University materials lab, PLA/PETG regrind for extrusion research
- 🇺🇸 USA — Injection molding workshop, processing sprue and reject parts on-site
- 🇵🇱 Poland — Small recycling operator, mixed rigid plastic volume reduction
- 🇦🇺 Australia — R&D center for bioplastic composite testing
- 🇯🇵 Japan — QC department, confidential product destruction
(Client names confidential on request. Case study details available during quote process.)
Why Buyers Trust Rumtoo
Exported Worldwide
Machines delivered to 50+ countries across Asia, Europe, Africa, and the Americas.
1-Year Warranty
Motor, gearbox, and blades covered. Spare parts available throughout the machine’s lifetime.
Full Technical Support
Installation guidance, operation training, and ongoing maintenance support included.
No MOQ
Order a single test unit or in bulk. Many customers start with one machine for evaluation.
Frequently Asked Questions
It handles plastics, rubber, cardboard, light mixed scrap, and similar materials. The H13 steel blades are strong enough to shred reinforcing steel bars, so most light industrial materials are well within its capacity.
It is designed for small-batch and light industrial work such as labs, workshops, and sample processing. For long continuous duty, the feed rate and material type should match the machine’s capacity. Contact us with your specific workflow and we will advise on suitability.
The standard configuration is 220V / 50Hz. Custom voltage options are available on request to match your local power supply requirements.
Standard lead time is typically 7–15 working days depending on order volume. We ship worldwide via sea freight, air freight, or express courier depending on urgency and destination. Contact us for a shipping quote.
We provide a 1-year warranty covering motor, gearbox, and blade components against manufacturing defects. Spare parts, technical support, and installation guidance are available throughout the machine’s lifetime.
Yes. Many customers start with one unit for testing and evaluation before committing to a larger order. There is no minimum order quantity. Contact us to discuss your requirements and we will arrange a trial unit.
The final price depends on blade configuration (5 mm vs 3 mm), voltage (110V/220V/custom), shipping destination, and quantity. Listing a single number would be misleading. We provide an exact quote within 24 hours once we understand your material and setup.
Entry-level shredders under $1,500 typically use mild steel blades, lower-torque motors, and are built for soft materials like filament waste. The RTMS-C120 uses H13 industrial steel blades and a 1.5 kW geared drive designed for rigid plastics and light metal scrap — targeting a different use case and durability standard.
Yes. Send us a sample of your material and we’ll run a shredding test and share the video and output particle results before you place an order. This is free within reason.
Tell Us What You Need to Shred — We’ll Handle the Rest
Describe your material and use case. We will recommend the right model, provide pricing, and confirm lead time.
Comments are closed.