Welcome to “Rumtoo” Plastic Recycling Machinery, where high-quality PP/PE film recycling machinery is our top priority. Our machines are designed with the features of easy operation, easy maintenance, and reasonable prices. Our experienced engineers are ready to provide you with detailed operation manuals, technical documents, and timely after-sales service.
At the same time, we also provide free product design services. We are committed to customizing production solutions for customers, making production more efficient and environmentally friendly, thereby forming the core competitiveness of sustainable development and contributing to global energy conservation, emission reduction, and green economic development, striving to create a better life.
Our products include: plastic recycling lines, plastic washing lines, shredders, crushers, compaction granulation systems, and film extruders.
Customers are our respected employers, and your requirements will be fully respected here.
Is your factory covered in white powder? Is your crusher deafening? Rigid PVC recycling presents unique environmental challenges. This guide explains how to control fine dust and reduce noise levels to meet safety standards.
Recycling rigid PVC (Polyvinyl Chloride) is highly profitable, but it comes with two notorious byproducts: fine electrostatic dust and high decibel noise.
Unlike PE or PP, rigid PVC shatters when crushed. This creates a fine "flour-like" powder that coats your motors, sensors, and workers' lungs. Additionally, crushing hollow pipes acts like an amplifier, creating noise levels that often exceed 100dB(A).
If you are planning a recycling line, environmental control isn't just "nice to have"—it is essential for machine longevity and worker retention.
1. The Dust Challenge: Why Simple Bags Don't Work
Many basic crushers come with a simple cloth bag for dust collection. For Rigid PVC, this is a recipe for failure.
PVC dust is extremely fine and carries a static charge. It quickly clogs the pores of standard filter bags, causing back-pressure. When back-pressure builds up, your crusher overheats, and dust starts leaking out of the hopper into the factory air.
The Risk of PVC Dust
- Motor Failure: Fine powder enters cooling fans and coats windings, causing overheating.
- Sensor Blindness: Optical sorters and sensors fail when coated in white dust.
- Health Hazard: Long-term inhalation of micro-plastics is a serious safety violation.
The Solution: Pulse-Jet Dust Collection
For rigid PVC lines, we recommend upgrading from simple "bag filters" to a Pulse-Jet Filtering System.
- Cyclone Separator: First, a cyclone spins the air to drop heavy flakes (regrind) into the silo.
- Auto-Cleaning Filter: The remaining dusty air goes to a filter cartridge. A system blasts compressed air (the "Pulse") into the filters every few seconds, knocking the dust down into a collection bin.
- Result: Constant airflow, no clogging, and a clean factory floor.
2. The Noise Challenge: Silencing the Scream
Rigid PVC pipes are hollow and stiff. When a crusher blade hits them, the pipe vibrates like a bell. Without protection, a pipe crusher can easily reach 105-110 dB, which causes permanent hearing damage in minutes.
How to Configure a Low-Noise Line
You cannot stop the crushing sound, but you can contain it. Here is the standard for a modern, compliant PVC recycling plant:
| Feature | Standard Machine | Low-Noise Configuration (Recommended) |
|---|---|---|
| Hopper Design | Single layer steel | "Sandwich" Steel (filled with sound-dampening foam) |
| Infeed Type | Open Vertical Hopper | Horizontal Trough (Enclosed) or Conveyor with curtains |
| Cutting Geometry | Flat/Claw Blades (High impact noise) | V-Shape / Scissor Cut (Smooth shearing action) |
| Enclosure | None | Full Soundproof Box (Reduces noise by 15-20dB) |
Pro Tip: For the absolute lowest noise, consider a Shredder running at low speed (80 RPM) instead of a high-speed crusher for the first step. Shredders grind quietly.
3. Special Note for PVC Pulverizers
If your line includes a PVC Pulverizer (Miller) to turn flakes into powder for extrusion, dust control becomes the #1 priority.
Pulverizing is essentially "creating dust on purpose." A sealed pneumatic transport system is mandatory. Ensure your pulverizer includes a Rotary Valve (Airlock) at the discharge. Without an airlock, the pressure difference will blow powder all over your facility.
Your Facility Checklist
Before ordering your next machine, check these environmental specs:
- Electrical: Are the control panel cabinets dust-proof (IP54 or higher)?
- Collection: Does the dust collector use "Pulse Jet" cleaning, or just passive bags?
- Sound: Is the crusher hopper insulated (double-wall)?
- Positioning: Can the dust collection unit be placed outside the building to reduce indoor noise?
Build a Safe, Clean Recycling Plant
Don't let dust and noise become a liability. All our PVC recycling lines can be equipped with heavy-duty soundproofing and pulse-jet filtration systems.
Tell us your environmental requirements, and we will quote the compliant solution.
Get a Quote for a Clean/Quiet Line →