{"id":10640,"date":"2025-02-04T05:55:39","date_gmt":"2025-02-04T13:55:39","guid":{"rendered":"https:\/\/www.recyclemachine.net\/?p=10640"},"modified":"2026-09-25T23:06:28","modified_gmt":"2026-09-26T06:06:28","slug":"%d0%ba%d0%b0%d0%ba-%d1%83%d1%81%d1%82%d1%80%d0%b0%d0%bd%d0%b8%d1%82%d1%8c-%d1%80%d0%b0%d1%81%d0%bf%d1%80%d0%be%d1%81%d1%82%d1%80%d0%b0%d0%bd%d0%b5%d0%bd%d0%bd%d1%8b%d0%b5-%d0%bf%d1%80%d0%be%d0%b1-2","status":"publish","type":"post","link":"https:\/\/www.recyclemachine.net\/ru\/%d0%ba%d0%b0%d0%ba-%d1%83%d1%81%d1%82%d1%80%d0%b0%d0%bd%d0%b8%d1%82%d1%8c-%d1%80%d0%b0%d1%81%d0%bf%d1%80%d0%be%d1%81%d1%82%d1%80%d0%b0%d0%bd%d0%b5%d0%bd%d0%bd%d1%8b%d0%b5-%d0%bf%d1%80%d0%be%d0%b1-2\/","title":{"rendered":"\u041a\u0430\u043a \u0443\u0441\u0442\u0440\u0430\u043d\u044f\u0442\u044c \u0440\u0430\u0441\u043f\u0440\u043e\u0441\u0442\u0440\u0430\u043d\u0435\u043d\u043d\u044b\u0435 \u043d\u0435\u0438\u0441\u043f\u0440\u0430\u0432\u043d\u043e\u0441\u0442\u0438 \u0433\u0440\u0430\u043d\u0443\u043b\u044f\u0442\u043e\u0440\u043e\u0432 \u043f\u043b\u0430\u0441\u0442\u0438\u043a\u0430"},"content":{"rendered":"<script type=\"application\/ld+json\">\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Why does my plastic granulator keep clogging?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Clogging usually comes from feeding material faster than the granulator can cut, from residual debris packed in the chamber, or from foreign objects. Match the feed rate to rated capacity, clean the chamber regularly, and screen the infeed for metal, stones, or other foreign matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Why is my granulator overheating?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The usual causes are dull blades (more friction), overloading beyond rated capacity, or a failed cooling system. Sharpen or replace blades, reduce the load, and verify that cooling water flow and temperature are within specification.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How often should I sharpen granulator blades?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It depends on the material \u2014 abrasive materials like glass-filled nylon dull blades much faster than clean PET or PP. Inspect blades weekly; sharpen at the first sign of higher current draw, overheating, or uneven particle size, rather than waiting for a fixed calendar date.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What causes poor granule quality (fines, dust, black spots)?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Excessive fines usually point to dull blades or a worn screen; black spots come from degraded material baked onto hot surfaces; uneven size comes from inconsistent feeding or damaged screens. Sharpen blades, clean the chamber, and check the screen for damage.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Why is my granulator so noisy all of a sudden?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A sudden increase in noise usually means something changed: a loose rotor bolt or blade, a broken blade, foreign metal in the chamber, or bearing wear. Stop the machine, lock it out, and inspect before restarting.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What should I do if the motor trips on overload?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"First reduce the feed rate and check for chamber blockage. Then verify the lubrication system, check motor-to-gearbox alignment, and confirm the supply voltage is stable \u2014 low voltage at peak hours is a classic cause of nuisance trips.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"When should I call a technician instead of troubleshooting myself?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Handle routine items (blade sharpening, screen changes, cleaning, lubrication) in-house. Call a technician for gearbox damage, motor rewinding, structural cracks, or any electrical fault beyond the control panel.\"\n      }\n    }\n  ]\n}\n<\/script>\n\n\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/www.recyclemachine.net\/plastic-granulators\/\">Plastic granulators<\/a> are essential machines in recycling and manufacturing processes, but they can encounter various operational issues. Below is a detailed guide to troubleshooting common problems such as clogging, overheating, and other performance-related issues.<\/p>\n\n\n\n<!--more-->\n\n\n\n<p class=\"wp-block-paragraph\">Before you touch a wrench: a granulator is a high-speed cutting machine with stored rotational energy. Always stop the rotor, lock out and tag out the power, and confirm the rotor has fully stopped before opening the cutting chamber. Most of the checks below take minutes and prevent the hour-long unplanned stoppages that kill production schedules.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Clogging Issues<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Clogging is the most frequent problem in plastic granulators, often caused by material buildup, foreign objects, or improper feeding. A clogged chamber stalls the rotor, spikes motor current, and can trip the overload protection \u2014 or worse, snap a belt or damage blades if the protection is slow.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Causes<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Residual plastic debris or dust packed inside the chamber and around the screen.<\/li>\n<li>Feeding faster than the granulator&#8217;s rated capacity \u2014 the most common cause.<\/li>\n<li>Foreign objects (metal, stones, tools) entering the feed port.<\/li>\n<li>Oversized or tangled feedstock (film, long runners) wrapping around the rotor.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Solutions<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Clear the chamber:<\/strong> lock out the machine, remove the screen, and clean out all packed material and debris. Never clear a running machine by hand.<\/li>\n<li><strong>Match the feed rate to capacity:<\/strong> use a metering conveyor or trained operators to keep infeed within the rated kg\/h. Watch motor current \u2014 sustained high current means overfeeding.<\/li>\n<li><strong>Screen the infeed:<\/strong> install a magnetic separator and visually inspect feedstock for foreign matter before it reaches the granulator.<\/li>\n<li><strong>Size the feedstock:<\/strong> pre-cut oversized parts or film so pieces enter the chamber at a size the rotor can bite.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Overheating<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Overheating degrades the plastic being processed \u2014 causing yellowing, black specks, and odor \u2014 and accelerates wear on bearings, belts, and blades. If the chamber or discharge feels excessively hot, or the granulate smells scorched, act immediately.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Causes<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Dull blades forcing the rotor to work harder \u2014 friction becomes heat.<\/li>\n<li>Overloading beyond rated capacity for extended periods.<\/li>\n<li>Blocked or failed cooling water circuit (scale, closed valves, pump failure).<\/li>\n<li>Poor lubrication raising bearing friction.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Solutions<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Sharpen or replace blades:<\/strong> sharp blades cut; dull blades rub. Blade condition is the number one factor in granulator heat.<\/li>\n<li><strong>Restore cooling:<\/strong> verify cooling water flow and temperature, descale the jacket, and check that valves are open.<\/li>\n<li><strong>Reduce the load:<\/strong> bring the feed rate back within rated capacity and allow cooling breaks during high-intensity runs.<\/li>\n<li><strong>Service lubrication:<\/strong> inspect and replace lubricating oil on schedule to keep bearing friction low.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Dull or Improperly Spaced Blades<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Blades are the heart of a granulator. Dull or misaligned blades don&#8217;t just cut poorly \u2014 they raise power consumption, generate heat and dust, produce oversized or stringy particles, and overload the motor. Most &#8220;mystery&#8221; granulator problems trace back to blade condition.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Causes<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Natural wear from abrasive materials (glass-filled plastics, mineral-filled compounds, dirty scrap).<\/li>\n<li>Blade gap set wrong after a blade change \u2014 too wide causes tearing, too tight causes blade contact and chipping.<\/li>\n<li>Blade bolts loosening under vibration, shifting blade position.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Solutions<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Establish a sharpening schedule:<\/strong> inspect blade edges weekly and sharpen at the first sign of performance drop \u2014 don&#8217;t wait for a failure.<\/li>\n<li><strong>Set the gap correctly:<\/strong> follow the manufacturer&#8217;s specification (typically a fraction of a millimeter) and check with a feeler gauge after every blade service.<\/li>\n<li><strong>Torque the bolts:<\/strong> tighten blade bolts to specification and re-check after the first shift of running.<\/li>\n<li><strong>Replace unserviceable blades:<\/strong> blades that are chipped, cracked, or sharpened past their limit should be replaced, not re-sharpened.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">High Noise Levels<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A granulator is never silent, but you know its normal sound. A sudden change \u2014 banging, grinding, or a rising whine \u2014 is the machine telling you something is wrong. Treat new noise as an urgent inspection trigger, not background ambience.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Causes<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Loose rotor bolts, blade bolts, or chamber fasteners rattling under load.<\/li>\n<li>Foreign metal object striking the blades.<\/li>\n<li>Worn or failing bearings \u2014 a rising whine or rumble.<\/li>\n<li>Dull blades hammering material instead of cutting it.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Solutions<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Stop and inspect:<\/strong> lock out the machine and check for loose parts, damaged blades, and foreign objects before restarting.<\/li>\n<li><strong>Check bearings:<\/strong> listen for bearing noise, check temperature, and replace bearings showing wear \u2014 a failed bearing can destroy the rotor shaft.<\/li>\n<li><strong>Sharpen blades:<\/strong> restore cutting efficiency to eliminate the hammering noise of dull edges.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Poor Granule Quality<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Buyers reject regrind for three visible defects: excessive fines and dust, black specks, and uneven particle size. Each has a different root cause, so diagnose before you adjust.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Causes<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Dull blades or worn screens generating fines instead of clean cuts.<\/li>\n<li>Degraded material baked onto hot chamber walls flaking off as black specks.<\/li>\n<li>Damaged or wrong-size screen holes passing oversized particles.<\/li>\n<li>Inconsistent feeding producing surges and starvation cycles.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Solutions<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Sharpen blades and inspect the screen:<\/strong> replace screens with enlarged or torn holes, and match screen size to the target particle spec.<\/li>\n<li><strong>Clean the chamber:<\/strong> remove baked-on degraded material from chamber walls and rotor \u2014 the source of black specks.<\/li>\n<li><strong>Stabilize feeding:<\/strong> use a metering feeder to maintain uniform material flow instead of batch dumping.<\/li>\n<li><strong>Control temperature:<\/strong> overheating melts fines onto granules; keep blades sharp and cooling working.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Motor Torque Issues<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Motor torque problems show up as repeated overload trips, sluggish rotor response under load, or the motor struggling at startup. The cause is rarely the motor itself \u2014 it&#8217;s usually the load path or the power supply.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Causes<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Chronic overfeeding raising the cutting load beyond motor capacity.<\/li>\n<li>Misalignment between motor and gearbox increasing resistance.<\/li>\n<li>Failed or degraded lubrication in bearings or gearbox.<\/li>\n<li>Low supply voltage \u2014 especially during plant peak hours.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Solutions<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Reduce feed loading:<\/strong> bring the infeed back within rated capacity and monitor current draw.<\/li>\n<li><strong>Check alignment:<\/strong> verify motor-to-gearbox alignment with a dial indicator during planned maintenance.<\/li>\n<li><strong>Service lubrication:<\/strong> clean and refill the lubrication system; check for contamination.<\/li>\n<li><strong>Stabilize power:<\/strong> if trips cluster at peak hours, investigate voltage sag and consider a soft starter or scheduling heavy loads off-peak.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Friction Clutch Failures<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">On granulators equipped with friction clutches, clutch slip or failure interrupts drive transmission \u2014 the motor runs but the rotor doesn&#8217;t respond properly. Clutches also serve as overload protection, so a clutch that slips constantly is telling you the cutting load is too high.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Causes<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Clutch air pressure or engagement speed set outside the recommended range.<\/li>\n<li>Worn friction surfaces from repeated overload slips.<\/li>\n<li>Low starting voltage making the motor struggle, overheating the clutch during engagement.<\/li>\n<li>Inadequate cooling during frequent start-stop cycles.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Solutions<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Reset clutch parameters:<\/strong> set air pressure and engagement speed per the manufacturer&#8217;s specification.<\/li>\n<li><strong>Reduce the cutting load:<\/strong> a clutch that slips repeatedly is protecting the drivetrain from overfeeding \u2014 fix the feed rate.<\/li>\n<li><strong>Cool the clutch:<\/strong> ensure ventilation or forced cooling during frequent restarts.<\/li>\n<li><strong>Replace worn friction surfaces:<\/strong> glazed or thin friction discs must be replaced, not adjusted.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Preventive Maintenance Schedule<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Almost every issue above is cheaper to prevent than to fix. A simple schedule, posted at the machine, turns troubleshooting from firefighting into routine:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Daily:<\/strong> check for unusual noise and vibration, verify feed rate against capacity, empty the collection bin, confirm cooling water flow.<\/li>\n<li><strong>Weekly:<\/strong> inspect blade edges, check belt tension, clean the screen and chamber, verify lubrication levels.<\/li>\n<li><strong>Monthly:<\/strong> torque-check blade and rotor bolts, inspect the screen for wear, check electrical connections, review motor current logs for creeping load.<\/li>\n<li><strong>Quarterly:<\/strong> change lubrication oil, check motor-gearbox alignment, inspect bearings, review and restock wear parts (blades, screens, belts).<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Frequently Asked Questions<\/h2>\n\n\n<h3 class=\"wp-block-heading\">Why does my plastic granulator keep clogging?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Clogging usually comes from feeding material faster than the granulator can cut, from residual debris packed in the chamber, or from foreign objects. Match the feed rate to rated capacity, clean the chamber regularly, and screen the infeed for metal, stones, or other foreign matter.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Why is my granulator overheating?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The usual causes are dull blades (more friction), overloading beyond rated capacity, or a failed cooling system. Sharpen or replace blades, reduce the load, and verify that cooling water flow and temperature are within specification.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">How often should I sharpen granulator blades?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">It depends on the material \u2014 abrasive materials like glass-filled nylon dull blades much faster than clean PET or PP. Inspect blades weekly; sharpen at the first sign of higher current draw, overheating, or uneven particle size, rather than waiting for a fixed calendar date.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What causes poor granule quality (fines, dust, black spots)?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Excessive fines usually point to dull blades or a worn screen; black spots come from degraded material baked onto hot surfaces; uneven size comes from inconsistent feeding or damaged screens. Sharpen blades, clean the chamber, and check the screen for damage.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Why is my granulator so noisy all of a sudden?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">A sudden increase in noise usually means something changed: a loose rotor bolt or blade, a broken blade, foreign metal in the chamber, or bearing wear. Stop the machine, lock it out, and inspect before restarting.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What should I do if the motor trips on overload?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">First reduce the feed rate and check for chamber blockage. Then verify the lubrication system, check motor-to-gearbox alignment, and confirm the supply voltage is stable \u2014 low voltage at peak hours is a classic cause of nuisance trips.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">When should I call a technician instead of troubleshooting myself?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Handle routine items (blade sharpening, screen changes, cleaning, lubrication) in-house. Call a technician for gearbox damage, motor rewinding, structural cracks, or any electrical fault beyond the control panel.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A well-maintained <a href=\"https:\/\/www.recyclemachine.net\/how-to-choose-the-right-plastic-granulator-machine\/\">plastic granulator<\/a> runs quietly, cuts cleanly, and rarely surprises you. Most breakdowns are not random \u2014 they are the predictable result of dull blades, overfeeding, or neglected maintenance. Work through this guide systematically, keep a preventive schedule, and your granulator will reward you with years of reliable service.<\/p>\n\n","protected":false},"excerpt":{"rendered":"<p>Diagnoses four common granulator problems \u2014 clogging, overheating, dull or misaligned blades, and high noise \u2014 with causes and fixes for each. A handy maintenance reference for operators who need to get a misbehaving granulator back to rated spec quickly.<\/p>","protected":false},"author":1,"featured_media":10645,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1997],"tags":[],"class_list":["post-10640","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-buying-guides"],"tsf_seo":{"title":"","description":"\u0423\u0441\u0442\u0440\u0430\u043d\u0435\u043d\u0438\u0435 \u0440\u0430\u0441\u043f\u0440\u043e\u0441\u0442\u0440\u0430\u043d\u0451\u043d\u043d\u044b\u0445 \u043f\u0440\u043e\u0431\u043b\u0435\u043c \u0434\u0440\u043e\u0431\u0438\u043b\u043e\u043a \u0434\u043b\u044f \u043f\u043b\u0430\u0441\u0442\u0438\u043a\u0430: \u0437\u0430\u0441\u043e\u0440\u0435\u043d\u0438\u0435, \u043f\u0435\u0440\u0435\u0433\u0440\u0435\u0432, \u0437\u0430\u0442\u0443\u043f\u0438\u0432\u0448\u0438\u0435\u0441\u044f \u043d\u043e\u0436\u0438, \u0448\u0443\u043c, \u043d\u0438\u0437\u043a\u043e\u0435 \u043a\u0430\u0447\u0435\u0441\u0442\u0432\u043e \u0434\u0440\u043e\u0431\u043b\u0451\u043d\u043a\u0438, \u043a\u0440\u0443\u0442\u044f\u0449\u0438\u0439 \u043c\u043e\u043c\u0435\u043d\u0442 \u0434\u0432\u0438\u0433\u0430\u0442\u0435\u043b\u044f, \u043e\u0442\u043a\u0430\u0437\u044b \u043c\u0443\u0444\u0442\u044b \u2014 \u043f\u043b\u044e\u0441 \u0433\u0440\u0430\u0444\u0438\u043a \u043f\u0440\u043e\u0444\u0438\u043b\u0430\u043a\u0442\u0438\u0447\u0435\u0441\u043a\u043e\u0433\u043e \u043e\u0431\u0441\u043b\u0443\u0436\u0438\u0432\u0430\u043d\u0438\u044f."},"_links":{"self":[{"href":"https:\/\/www.recyclemachine.net\/ru\/wp-json\/wp\/v2\/posts\/10640","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.recyclemachine.net\/ru\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.recyclemachine.net\/ru\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.recyclemachine.net\/ru\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.recyclemachine.net\/ru\/wp-json\/wp\/v2\/comments?post=10640"}],"version-history":[{"count":1,"href":"https:\/\/www.recyclemachine.net\/ru\/wp-json\/wp\/v2\/posts\/10640\/revisions"}],"predecessor-version":[{"id":17549,"href":"https:\/\/www.recyclemachine.net\/ru\/wp-json\/wp\/v2\/posts\/10640\/revisions\/17549"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.recyclemachine.net\/ru\/wp-json\/wp\/v2\/media\/10645"}],"wp:attachment":[{"href":"https:\/\/www.recyclemachine.net\/ru\/wp-json\/wp\/v2\/media?parent=10640"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.recyclemachine.net\/ru\/wp-json\/wp\/v2\/categories?post=10640"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.recyclemachine.net\/ru\/wp-json\/wp\/v2\/tags?post=10640"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}