{"id":10433,"date":"2026-02-05T23:46:28","date_gmt":"2026-02-06T07:46:28","guid":{"rendered":"https:\/\/www.recyclemachine.net\/?p=10433"},"modified":"2026-04-27T22:45:29","modified_gmt":"2026-04-28T05:45:29","slug":"kies-de-juiste-plasticrecyclingmachine","status":"publish","type":"post","link":"https:\/\/www.recyclemachine.net\/nl\/kies-de-juiste-plasticrecyclingmachine\/","title":{"rendered":"Gids voor keuze van plastic recyclingmachine op basis van afvalsoort"},"content":{"rendered":"\n<p><strong>Last updated: April 28, 2026 | Reviewed by the Rumtoo technical team<\/strong><\/p>\n\n\n\n<p><strong>Plastic recycling machine<\/strong> selection starts with one practical question: what waste do you need to process every day? A machine that works well for clean PP injection scrap can fail on wet post-consumer film, and a PET bottle washing line will not solve the same problem as a pelletizing extruder. This guide helps buyers match resin type, contamination level, capacity, output quality, plant layout, and supplier scope before requesting a quote.<\/p>\n\n\n\n<p>If you want to compare equipment categories while reading, keep our <a href=\"https:\/\/www.recyclemachine.net\/recycling-machines\/\">recycling machine categories<\/a> page open. It shows the main systems used in industrial plastic recycling, including shredders, crushers, washing lines, drying units, and pelletizing equipment.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Quick Answer: Which Plastic Recycling Machine Do You Need?<\/h2>\n\n\n\n<p>The right equipment depends on the waste form, resin, dirt level, and target output. Clean factory scrap often needs size reduction and pelletizing. Dirty post-consumer material, such as bottles or film, usually needs sorting, washing, separation, drying, and then extrusion if the target is pellets.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Waste stream<\/th><th>Common machine route<\/th><th>Typical output<\/th><th>Key risk to check<\/th><\/tr><\/thead><tbody><tr><td>Clean PP\/PE injection scrap<\/td><td>Crusher or shredder + pelletizing line<\/td><td>Pellets for reuse<\/td><td>Metal contamination and melt flow variation<\/td><\/tr><tr><td>Post-consumer PET bottles<\/td><td>Debaler + label remover + crusher + washing + separation + drying<\/td><td>Clean PET flakes, sometimes pellets<\/td><td>PVC, labels, glue, moisture, color mix<\/td><\/tr><tr><td>LDPE\/LLDPE film and bags<\/td><td>Shredder or crusher + friction washing + squeezer\/dryer + cutter-compactor pelletizer<\/td><td>Dry flakes or pellets<\/td><td>Water, sand, ink, inconsistent feeding<\/td><\/tr><tr><td>Rigid HDPE\/PP crates, drums, caps<\/td><td>Shredder or granulator + washing + sink-float separation + drying + pelletizing<\/td><td>Clean flakes or pellets<\/td><td>Mixed polymers, labels, heavy dirt<\/td><\/tr><tr><td>Pipes, lumps, purgings, thick parts<\/td><td>Single-shaft shredder + crusher if needed + extrusion with filtration<\/td><td>Regrind or pellets<\/td><td>Large feed size, motor load, blade wear<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">What Most Buyer Guides Miss<\/h2>\n\n\n\n<p>Many buyer guides answer several useful questions at once: machine types, line configuration, price range, plant capacity, materials handled, and how to choose a supplier. Strong equipment pages also group systems into clear sections such as shredding, washing, separation, drying, pelletizing, and small-scale recycling.<\/p>\n\n\n\n<p>The common content gap is practical qualification. Many pages list equipment, but fewer explain how to connect the machine choice to a real waste audit, moisture target, contamination source, utility limits, safety requirements, and output buyer specs. This article fills that gap with checklists you can send to an equipment supplier.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">1) Identify the Polymer Before Choosing the Machine<\/h2>\n\n\n\n<p>The recycling system must match the polymer first. PET, HDPE, LDPE, LLDPE, PP, PS, ABS, PVC, PA, and PC behave differently during crushing, washing, drying, melting, filtration, and pellet cutting. A single clean polymer stream gives you the simplest process route. A mixed stream needs sorting or a lower-value output target.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>PET bottles:<\/strong> focus on de-labeling, PVC removal, hot washing, high drying performance, and flake purity.<\/li>\n\n\n\n<li><strong>HDPE and PP rigid plastics:<\/strong> focus on size reduction, sink-float separation, friction washing, drying, and stable pelletizing.<\/li>\n\n\n\n<li><strong>PE film:<\/strong> focus on feeding, squeezing or drying, degassing, and filtration because film carries water, ink, and dirt.<\/li>\n\n\n\n<li><strong>PVC profiles or pipes:<\/strong> keep PVC away from PET and polyolefin streams, and select equipment built for abrasive rigid feed.<\/li>\n<\/ul>\n\n\n\n<p>The U.S. EPA reports that plastics reached 35.7 million tons of U.S. municipal solid waste generation in 2018, with plastic containers and packaging at more than 14.5 million tons. That scale matters because recycling plants rarely receive perfect material; they receive mixed, dirty, and variable feedstock. Source: <a href=\"https:\/\/www.epa.gov\/facts-and-figures-about-materials-waste-and-recycling\/plastics-material-specific-data\" target=\"_blank\" rel=\"noopener\">EPA Plastics: Material-Specific Data<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">2) Define the Output: Regrind, Clean Flakes, or Pellets<\/h2>\n\n\n\n<p>Choose the process route by the product you plan to sell or reuse. Regrind, washed flakes, and pellets serve different buyers. If you define the output late, you may buy a line that runs but cannot meet the quality target.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Target output<\/th><th>Equipment usually needed<\/th><th>When it makes sense<\/th><\/tr><\/thead><tbody><tr><td>Shredded or crushed regrind<\/td><td>Shredder, crusher, granulator, metal separator<\/td><td>Clean industrial scrap or material sold to another processor<\/td><\/tr><tr><td>Washed flakes<\/td><td>Size reduction, friction washing, sink-float tank, hot wash if needed, dryer<\/td><td>PET bottles, HDPE bottles, PP\/PE rigid plastics, film after washing<\/td><\/tr><tr><td>Pellets<\/td><td>Washed\/dried feed, extruder, melt filter, degassing, pelletizer, cooling, silo<\/td><td>Manufacturers need stable feed for extrusion, injection, or film blowing<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>For a fuller cost discussion, see our <a href=\"https:\/\/www.recyclemachine.net\/how-much-does-a-plastic-recycling-machine-cost\/\">2026 equipment cost guide<\/a>. For pellet output, compare the process options on our <a href=\"https:\/\/www.recyclemachine.net\/plastic-pelletizers\/\">plastic pelletizing lines<\/a> page.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">3) Match Feed Form to the Feeding System<\/h2>\n\n\n\n<p>Feeding controls the real output of the line. A catalog may show 500 kg\/h, but wet film, bulky woven bags, hard lumps, or long pipes can reduce practical throughput if the intake design does not fit the feed form.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Film, bags, raffia, and nonwoven fabric:<\/strong> use a cutter-compactor or force-feeding system to densify material before extrusion.<\/li>\n\n\n\n<li><strong>Rigid flakes and regrind:<\/strong> use controlled screw feeding or dosing to prevent surging in the extruder.<\/li>\n\n\n\n<li><strong>Lumps, purgings, drums, and thick parts:<\/strong> use a single-shaft shredder before crushing or extrusion.<\/li>\n\n\n\n<li><strong>PET bottles:<\/strong> remove labels and reduce bottle size before washing, separation, and drying.<\/li>\n<\/ul>\n\n\n\n<p>Do not choose by motor power alone. Ask the supplier to show feeding video with material similar to yours, not only clean factory flakes.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">4) Check Contamination Before You Price the Line<\/h2>\n\n\n\n<p>Contamination decides whether the project needs a simple pretreatment stage or a complete washing system. Post-industrial scrap may go directly to crushing and pelletizing. Post-consumer waste often carries paper, labels, sand, food residue, oil, metal, moisture, and mixed polymers.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Light contamination:<\/strong> cold washing, friction washing, and standard drying may be enough.<\/li>\n\n\n\n<li><strong>Heavy oil or glue:<\/strong> add hot washing, chemical dosing, and stronger rinsing.<\/li>\n\n\n\n<li><strong>Sand or glass:<\/strong> protect blades, pumps, screws, and melt filters with early removal.<\/li>\n\n\n\n<li><strong>Mixed density materials:<\/strong> use sink-float separation to remove incompatible plastics where density allows.<\/li>\n<\/ul>\n\n\n\n<p>Labels and adhesives can damage final quality. The Association of Plastic Recyclers notes that label adhesive, coverage area, substrate, decoration, and inks all affect PET recycling, and non-releasing adhesives can stay attached and become a contamination source. Source: <a href=\"https:\/\/plasticsrecycling.org\/apr-design-hub\/apr-design-guide\/pet-rigid\/\" target=\"_blank\" rel=\"noopener\">APR Design Guide for PET Rigid Packaging<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">5) Decide When Sorting Is Worth the Cost<\/h2>\n\n\n\n<p>Sorting is worth the cost when mixed resin or color variation reduces the sale value of your flakes or pellets. A lower-cost manual sorting table may work for small, clean streams. High-volume post-consumer plants often need optical sorting before or after size reduction.<\/p>\n\n\n\n<p>TOMRA reports that modern sorting systems can reach over 95% purity in HDPE and PP recovery without manual sorting in the right application. That figure does not mean every plant needs an optical sorter; it means purity targets should guide the sorting budget. Source: <a href=\"https:\/\/www.tomra.com\/waste-metal-recycling\/applications\/waste-recycling\/plastics\" target=\"_blank\" rel=\"noopener\">TOMRA plastics sorting applications<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">6) Size Capacity by Real Operating Hours<\/h2>\n\n\n\n<p>Size the line by stable hourly output, not short test peaks. Define your required monthly tonnage, then work backward through shifts, planned maintenance, cleaning stops, blade changes, filter changes, and material changeovers.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Planning item<\/th><th>Question to answer<\/th><th>Why it matters<\/th><\/tr><\/thead><tbody><tr><td>Target kg\/h<\/td><td>What output must the line hold for a full shift?<\/td><td>Prevents buying a machine that only meets peak output briefly<\/td><\/tr><tr><td>Moisture target<\/td><td>What moisture can your pelletizer or buyer accept?<\/td><td>Sets dryer, squeezer, and energy needs<\/td><\/tr><tr><td>Material changeover<\/td><td>How often will resin or color change?<\/td><td>Affects cleaning time and scrap rate<\/td><\/tr><tr><td>Plant space<\/td><td>What floor length, ceiling height, and service access do you have?<\/td><td>Prevents installation delays<\/td><\/tr><tr><td>Utilities<\/td><td>What power, water, compressed air, and wastewater capacity are available?<\/td><td>Can change the washing and drying design<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>Leave capacity room for the next 12 to 24 months, but avoid oversizing so far that the line runs below its stable operating range. A line that runs at a steady 75% to 85% load often performs better than one that runs far below design capacity.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">7) Compare Machine Types by Role, Not by Name<\/h2>\n\n\n\n<p>Buyers often search for one machine, but an industrial system is usually a process line. Each machine has a job: reduce size, remove dirt, separate materials, remove water, melt plastic, filter contamination, and cut pellets.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Machine type<\/th><th>Main role<\/th><th>Good fit<\/th><th>Watch for<\/th><\/tr><\/thead><tbody><tr><td>Shredder<\/td><td>Primary size reduction for bulky or tough material<\/td><td>Lumps, drums, pipes, woven bags, thick parts<\/td><td>Rotor design, blade access, torque, safety guards<\/td><\/tr><tr><td>Crusher or granulator<\/td><td>Secondary size reduction into flakes<\/td><td>Bottles, rigid parts, washed material<\/td><td>Screen size, wet\/dry operation, blade wear<\/td><\/tr><tr><td>Washing line<\/td><td>Remove dirt, labels, glue, and mixed materials<\/td><td>PET bottles, PP\/PE film, rigid HDPE\/PP<\/td><td>Water treatment, hot wash need, final moisture<\/td><\/tr><tr><td>Dewatering and drying<\/td><td>Remove free water and surface moisture<\/td><td>Film and washed flakes<\/td><td>Moisture target, energy use, dust control<\/td><\/tr><tr><td>Extruder and pelletizer<\/td><td>Melt, filter, degas, and cut pellets<\/td><td>Clean flakes, film, regrind<\/td><td>Filter type, venting, screw design, pellet shape<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>If you are comparing shredder models, our <a href=\"https:\/\/www.recyclemachine.net\/ultimate-guide-to-choosing-the-right-industrial-shredder\/\">industrial shredder buyer guide<\/a> explains rotor, torque, screen, and application differences in more detail. For bottle projects, see the <a href=\"https:\/\/www.recyclemachine.net\/pet-bottle-washing-line\/\">PET bottle washing line<\/a> process.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">8) Build an RFQ That Suppliers Can Price Accurately<\/h2>\n\n\n\n<p>A supplier can price your recycling line more accurately when your request includes material facts instead of a broad phrase such as \u201cplastic waste.\u201d Send one consistent RFQ to every supplier so you can compare scope, not just headline price.<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li>Polymer list with estimated percentages, such as 70% LDPE film and 30% PP woven bags.<\/li>\n\n\n\n<li>Photos and videos of real waste before sorting, after sorting, and after any existing crushing.<\/li>\n\n\n\n<li>Contamination notes: sand, paper, labels, oil, food residue, metals, moisture, and mixed colors.<\/li>\n\n\n\n<li>Target output: regrind size, washed flake moisture, pellet size, color, and final application.<\/li>\n\n\n\n<li>Capacity target in kg\/h and monthly tons, with operating hours per shift and shifts per day.<\/li>\n\n\n\n<li>Utility limits: voltage, power allowance, water supply, wastewater treatment, compressed air, and floor space.<\/li>\n\n\n\n<li>Commercial scope: machine only, full line, installation, training, spare parts, warranty, and remote support.<\/li>\n<\/ol>\n\n\n\n<h2 class=\"wp-block-heading\">9) Ask for a Trial Run Before You Buy<\/h2>\n\n\n\n<p>A trial run with your material can reveal problems that a brochure cannot show. Ask the supplier to process a representative sample and report stable output, motor load, moisture after drying, melt pressure, filter change frequency, pellet appearance, and downtime during the test.<\/p>\n\n\n\n<p>For film, watch the feeding consistency and degassing. For PET bottles, check label removal, PVC control, wash quality, and final moisture. For rigid HDPE or PP, check flake size, float-sink separation, metal removal, and pellet filtration. Keep the test conditions in writing so you can compare suppliers fairly.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">10) Check Safety, Controls, and Service Access<\/h2>\n\n\n\n<p>Industrial recycling equipment includes moving blades, nip points, hot surfaces, high voltage, hydraulic systems, and heavy maintenance tasks. Safety design should be part of the purchase decision, not a later add-on.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Ask about fixed guards, interlocks, emergency stops, lockout points, and safe blade-change access.<\/li>\n\n\n\n<li>Confirm electrical cabinet standards, PLC language options, wiring diagrams, and spare parts lists.<\/li>\n\n\n\n<li>Check whether operators can clean screens, filters, tanks, and dryers without awkward lifting or unsafe reach.<\/li>\n\n\n\n<li>Request manuals, maintenance schedules, and training materials before shipment.<\/li>\n<\/ul>\n\n\n\n<p>OSHA warns that plastics processing machines need guards for nip points, moving parts, high voltage, and high temperature exposure, and it also points employers to lockout\/tagout and personal protective equipment. Source: <a href=\"https:\/\/www.osha.gov\/etools\/machine-guarding\/plastics-machinery\" target=\"_blank\" rel=\"noopener\">OSHA Machine Guarding: Plastics Machinery<\/a>. The Plastics Industry Association also lists ANSI\/PLASTICS machinery safety standards for equipment such as extrusion machinery. Source: <a href=\"https:\/\/www.plasticsindustry.org\/advocacy\/codes-standards\/machinery-safety-standards-committee\/\" target=\"_blank\" rel=\"noopener\">PLASTICS Machinery Safety Standards<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Common Selection Errors to Avoid<\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Choosing by price alone:<\/strong> a lower price can hide missing conveyors, dryers, controls, spare parts, installation, or water treatment.<\/li>\n\n\n\n<li><strong>Skipping the waste audit:<\/strong> equipment cannot fix unknown resin mix, dirt, moisture, or metal content.<\/li>\n\n\n\n<li><strong>Ignoring final buyers:<\/strong> pellet or flake customers may set limits for moisture, color, ash, PVC, odor, melt flow, or filtration residue.<\/li>\n\n\n\n<li><strong>Comparing incomplete quotations:<\/strong> one quote may include installation, spare blades, and training while another includes only core machinery.<\/li>\n\n\n\n<li><strong>Underestimating operation cost:<\/strong> blades, screens, filters, water, power, labor, and downtime all affect payback.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">FAQ About Plastic Recycling Machine Selection<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">What is a plastic recycling machine?<\/h3>\n\n\n\n<p>A plastic recycling machine is industrial equipment that turns plastic waste into regrind, clean flakes, or pellets. A complete line may include shredding, crushing, washing, sorting, drying, extrusion, filtration, degassing, and pelletizing.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Which plastic recycling machine is best for film waste?<\/h3>\n\n\n\n<p>Film waste usually needs a line with stable feeding, washing if the film is dirty, strong drying or squeezing, degassing, filtration, and a cutter-compactor pelletizing system. Wet agricultural film needs more washing and drying than clean factory trim.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Do I always need a washing line?<\/h3>\n\n\n\n<p>No. Clean and dry post-industrial scrap may move from crushing to pelletizing. Dirty post-consumer bottles, film, rigid packaging, and mixed collection waste usually need washing and drying before extrusion or sale as flakes.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">How much capacity should I choose?<\/h3>\n\n\n\n<p>Choose capacity from required monthly output and real operating hours. Include maintenance, filter changes, blade changes, material changeovers, and cleaning stops. A stable 500 kg\/h line often beats a 700 kg\/h line that only reaches that number briefly.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What information should I send to a supplier first?<\/h3>\n\n\n\n<p>Send resin type, waste photos and videos, contamination level, moisture condition, target output, required kg\/h, plant space, power supply, water conditions, and whether you need a machine-only quote or a full installed line.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">How do I compare two plastic recycling machine quotations?<\/h3>\n\n\n\n<p>Compare process scope, capacity basis, included auxiliaries, motor brands, electrical standards, water treatment, installation, training, spare parts, warranty, and trial-run results. Do not compare only the total purchase price.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Next Step: Match Your Waste to a Line Design<\/h2>\n\n\n\n<p>The right system is the one that fits your real feedstock, output buyer, plant limits, and payback target. Start with a waste audit, define the output, run a sample test, and request scope-aligned quotations. That process reduces wrong equipment choices and gives your team a clearer path from waste plastic to saleable flakes or pellets.<\/p>\n\n\n\n<p>To move from planning to equipment selection, review the <a href=\"https:\/\/www.recyclemachine.net\/recycling-machines\/\">available recycling machines<\/a> or send Rumtoo your material photos, target capacity, and output requirements for a technical recommendation.<\/p>\n\n\n\n<script type=\"application\/ld+json\">\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is a plastic recycling machine?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A plastic recycling machine is industrial equipment that turns plastic waste into regrind, clean flakes, or pellets. A complete line may include shredding, crushing, washing, sorting, drying, extrusion, filtration, degassing, and pelletizing.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Which plastic recycling machine is best for film waste?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Film waste usually needs a line with stable feeding, washing if the film is dirty, strong drying or squeezing, degassing, filtration, and a cutter-compactor pelletizing system. Wet agricultural film needs more washing and drying than clean factory trim.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Do I always need a washing line?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"No. Clean and dry post-industrial scrap may move from crushing to pelletizing. Dirty post-consumer bottles, film, rigid packaging, and mixed collection waste usually need washing and drying before extrusion or sale as flakes.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How much capacity should I choose?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Choose capacity from required monthly output and real operating hours. Include maintenance, filter changes, blade changes, material changeovers, and cleaning stops. A stable 500 kg\/h line often beats a 700 kg\/h line that only reaches that number briefly.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What information should I send to a supplier first?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Send resin type, waste photos and videos, contamination level, moisture condition, target output, required kg\/h, plant space, power supply, water conditions, and whether you need a machine-only quote or a full installed line.\"\n      }\n    }\n  ]\n}\n<\/script>\n\n","protected":false},"excerpt":{"rendered":"<p>Plastic recycling machinegids: match de afvalsoort, capaciteit, wassen, granuleren, veiligheid en leveranciersofferten voordat u apparatuur voor uw fabriek koopt.<\/p>","protected":false},"author":1,"featured_media":13151,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1997],"tags":[],"class_list":["post-10433","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-buying-guides"],"tsf_seo":{"title":"Gids voor Keuze van Plastic Recyclingsmachine (2026)","description":"Plastic recycling machinegids: match de afvalsoort, capaciteit, wassen, granuleren, veiligheid en leveranciersofferten voordat u apparatuur voor uw fabriek koopt.","robots":"index, follow","canonical":"https:\/\/www.recyclemachine.net\/choose-right-plastic-recycling-machine\/","og_title":"Plastic Recycling Machine Selection Guide (2026)","og_description":"Plastic recycling machine guide: match waste type, capacity, washing, pelletizing, safety, and supplier quotes before buying equipment for your plant.","og_image":"https:\/\/www.recyclemachine.net\/wp-content\/uploads\/2025\/01\/How-to-Choose-the-Right-Recycling-Machine-Based-on-Your-Plastic-Waste.webp"},"_links":{"self":[{"href":"https:\/\/www.recyclemachine.net\/nl\/wp-json\/wp\/v2\/posts\/10433","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.recyclemachine.net\/nl\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.recyclemachine.net\/nl\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.recyclemachine.net\/nl\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.recyclemachine.net\/nl\/wp-json\/wp\/v2\/comments?post=10433"}],"version-history":[{"count":1,"href":"https:\/\/www.recyclemachine.net\/nl\/wp-json\/wp\/v2\/posts\/10433\/revisions"}],"predecessor-version":[{"id":13941,"href":"https:\/\/www.recyclemachine.net\/nl\/wp-json\/wp\/v2\/posts\/10433\/revisions\/13941"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.recyclemachine.net\/nl\/wp-json\/wp\/v2\/media\/13151"}],"wp:attachment":[{"href":"https:\/\/www.recyclemachine.net\/nl\/wp-json\/wp\/v2\/media?parent=10433"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.recyclemachine.net\/nl\/wp-json\/wp\/v2\/categories?post=10433"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.recyclemachine.net\/nl\/wp-json\/wp\/v2\/tags?post=10433"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}